Handheld Laser Welding Guns Benifits

0-3000W full power welding
Fully enclosed structure, anti-pollution
Only 0.7KG, flexible and easy to use
Easy equipment maintenance
Multiple safety alarm monitoring

Handheld Laser Welding Gun Specs

SUP21T
SUP23S
SUP23T
SUP27S
Nozzle

Product Model	SUP21T
Power Rating	3000W
Operating Range	≤3000W
Collimation Focal Length	60mm
Focus Length	150mm
Maximum Pressure	15Bar
Vertical focus range	±10mm
Beam Spot Adjustment Range	Line 0-80mm
Wavelength Range	1070mm
Weight	0.7Kg

Product Model	SUP23S
Power Rating	3000W
Operating Range	≤3000W
Collimation Focal Length	D16 F60mm
Focus Length	D20 F150mm
Maximum Pressure	15Bar
Vertical focus range	±10mm
Beam Spot Adjustment Range	Line 0-80mm
Wavelength Range	1070mm
Weight	0.7Kg

Product Model	SUP23T
Power Rating	3000W
Operating Range	≤3000W
Collimation Focal Length	D16 F60mm
Focus Length	D20 F150mm
Maximum Pressure	15Bar
Vertical focus range	±10mm
Beam Spot Adjustment Range	Line 0-8mm
Wavelength Range	1064nm(±10nm)
Weight	0.7Kg

Product Model	SUP27S
Supply Voltage (V)	220V±5% AC 50/60Hz
Operating Ambient Temperature (℃)	-10~50℃
Operating Ambient Humidity (%)	≤70
Cooling Method	Water Cooling
Applicable Wavelength	1080nm(±10nm)
Applicable Power	≤3000W
Collimating Lens	D16*T5-F60
Focusing Lens	D30*T4-F200
Protection Lens	D30*T3
Reflecting Mirror	21.8172/24212
Recommended Air Flow Rate	10~15L/min (20℃ 0.15MPa)
Vertical Adjustment Range of Focus	±15mm
Weight	1.1kg
Compatible Laser	Beam Diameter after Collimation ≤10mm

type	Welding wire specification range	Usage scenarios	Wire feeding
C	null	Outside corner welding	×
Cutting nozzle	null	Cutting	×
AS-12	0.8/1.0/1.2mm	Flat angle inner angle outer angle welding	√
BS-16	1.6mm	Flat angle inner angle outer angle welding	√
CS-12	0.8/1.0/1.2mm	Outside corner welding	√
ES-12	0.8/1.0/1.2mm	External angle sheet welding	√
FS-16	1.6mm	Outside corner welding	√
AS-20	2.0mm	Flat angle inner angle outer angle welding	√

Three Reasons to Use Handheld Laser Welding Guns

Easy Maintenance

Focusing lens and protective lens are drawer-mounted, and collimating lens is integrated with QBH, which can be plugged in and out, making it easy to replace on site

Lightweight design

The gun body usually weighs only 0.7KG, and with the ergonomic grip design, it can be held in one hand for long-term operation, significantly reducing manual fatigue

double-protective-lens-handheld-laser-welder

Process adaptability

By adjusting the power parameters and replacing the copper nozzle, it can switch back and forth between different welding materials and welding conditions, and is widely used in a variety of application scenarios.

More About Handheld Laser Welding Guns

Product Size
SUP23T VS SUP23S
Handheld Laser Welding Gun for Batteries

SUP23T

- Supports four-in-one functions: Laser welding, Laser cleaning, Laser cutting, and weld cleaning.
- Focusing on multi-functionality and lightweight design (approximately 0.7kg).
- Ideal for small-batch, multi-tasking tasks (repair, 3D printing repair).

SUP23S

- Focused solely on Laser welding, it supports basic welding modes such as continuous welding and spot welding.
- It utilizes dual protective lenses (primary outer lens + secondary inner lens) to minimize lens wear.
- It’s suitable for mass production welding (car parts, steel structures), and supports automated production lines.

SUP27S is designed for battery welding.

It enables precise welding of tabs, cells & PACKs, boosting lithium battery production efficiency and quality.

Handheld Laser Welding Gun for Batteries